LIKE NEW FULLY TRANSFERABLE GROUP INDUSTRIES MODEL HR4332 SMG

LIKE NEW FULLY TRANSFERABLE GROUP INDUSTRIES MODEL HR4332 SMG

03-1676
Cal. 9mm
S# 102283

Bbl 10.2″. An original Group Industries UZI SMG, built on a Model HR4332 receiver & finished by Vector Arms of North Salt Lake, Utah. The original platform was available in several calibers, and this one is even marked “9mm/45ACP/22” but the vast majority were offered in 9mm Parabellum. It utilizes an open bolt, select fire mechanism that is light years ahead of its time. It can be utilized in its stock collapsed, concealable configuration, yet takes only moments to extend the rear stock w/ a simple slap of the control hand pulling it into its extended position. The Uzi bbl. only appears to be a couple inches in length which greatly minimizes its signature for use in tight quarters, but because of the ingenious design it actually extends back inside of the bolt giving the operator over 10 inches of rifled bbl. to increase hit probability immensely. Its ratcheting top cover is an important safety factor when utilizing an open bolt mechanism. Those that are familiar w/ the 1911 family of firearms will appreciate the grip safety integrated into the mechanism. This particular example has black plastic furniture & a collapsible, folding shoulder stock. Bottom front mounted bayonet lug. Sling swivels on left side of receiver & stock. Protected post front sight. Dual aperture rear sight. Left side markings “A-R-S” above safety/selector. Left rear receiver markings “HR4332 / 9mm/45ACP/22 / Group Ind / LOU KY 40214”. Above the trigger group, just below top cover it is marked “VECTOR ARMS, NSL. UT”. Right side receiver markings only include the serial number, “102283”. Light green canvas sling. MAGS: 6 steel 25 rd.

UNATTACHED ACCESSORIES: 2 leather magazine pouches, each holding 3 mags. 1 mag loader front sight tool & owners manual.

NATIONAL FIREARMS ACT MG REQUIRING BATF TRANSFER BEFORE TAKING POSSESSION. FULLY TRANSFERABLE. 

STATUS: MODERN CLASS III